XAG AUSTRALIA
DO NOT turn off the Battery or disconnect the power cable until LNT is OFF. Powering off the LNT
immaturely may lead to system corruption and system failure. User will be solely responsible for
any failure due to system corruption.
🧷
IMPORTANT
Power ON Press and hold the Power button on the LNT for at least 1 second and
release after the first indicator turns on. The device may take up to 10
minutes for the initialization, the initialization is completed approximately
2 minutes after the System Indicator (4th indicator) stops flashing and is
Solid Green, indicating the LNT is ready to be used.
Power OFF Press and hold the Power button on the LNT until the 2nd, 3rd, and 4th
indicator flashes. LNT is OFF when all indicators are OFF.
Turning the LNT ON/OFF
To Next Page
Loading...
