XAG V40 - Setting Operation Device; Set as Operation Device

91
XAG AUSTRALIA
01. On Accounts Menu, tap on “Device” to access the Device Menu.
02. Then tap on the corresponding Aircraft for Device Detail.
03. On the “Universal” Information Tab, tap on “Set as Operation Device”.
Set as operation Device
1
2
3
Aircraft are required to be set as operation devices before they can be used for Aerial Survey,
Spraying, or Spreading.
 LNT (Local Network Terminal) Wi-Fi Network had been set up & Connected
 Device binding of GNSS XRTK4 Mobile Station had been set up & Connected
 Device binding of Aircraft had been set up & Connected
 Devices are ON and displaying as Online in Device Menu
📋
PREREQUISITE