XAG V40 - Equipment Setup and Binding; Device Binding - Aircraft

XAG AUSTRALIA

Device Binding – Aircraft
 LNT (Local Network Terminal) Wi-Fi Network had been setup.
 LNT (Local Network Terminal) Wi-Fi Network is Connected before logging into / Open APP.
📋
PREREQUISITE
LNT (Local Network Terminal) must be connected to an external & internet available network indicated
by the WAN indicator on the LNT. Device Binding can only be achieved once all the Indicators on LNT
are ON.
🧷
IMPORTANT
01. Turn ON the Remote Controller & Open XAG One APP.
02. Tap on “My” to access Account Menu.
03. Tap on “Device”.