67
XAG AUSTRALIA
04. Tap on “ ” for more options, then Tap on “ ” for Device Binding options.
05. Tap on “RTK Mobile Station” to start Binding.
06. Press and hold F1 on the RTK Module Console for at least 3 seconds and release after hearing a
beep. This indicate that the RTK Module is ready to bind.
07. Tap on “Settings” to bring up the Available Wi-Fi List.
08. Select the corresponding RTK Module Wi-Fi
Default Module Wi-Fi Network: XBASE_XXXXXXXXXXXX
Default Module Password: 20070401
To Next Page
Loading...
