976-0043-01-02 xxiii
Table 2-1 Recommended Minimum Safety Ground Wire and DC Disconnect
Sizes per NEC 2–8
Table 2-2 Recommendced Battery Cable Size Versus Length - - - - - - - - - - - - - - - 2–14
Table 2-3 Battery Cable to Maximum Breaker/Fuse Size - - - - - - - - - - - - - - - - - - 2–15
Table 3-1 AC Disconnect and Wire Sizing- - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–27
Table 6-1 Basic Setup Menu Default Settings for the Sine Wave Plus
2524 and 2548 Models 6–2
Table 6-2 Basic Setup Menu Default Settings for the Sine Wave Plus
4024 and 4048 Models - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6–4
Table 6-3 Basic Setup Menu Default Settings for the Sine Wave Plus
5548 Model 6–6
Table 6-4 Battery Voltages For Setting Charging Parameters- - - - - - - - - - - - - - - - 6–21
Table 6-5 Battery Charging Current and Timer Default Settings - - - - - - - - - - - - - 6–21
Table 6-6 Calculating the Maximum Charge Amps for a 24-volt,
700 amp-hour Battery 6–22
Table 6-7 Calculating the Maximum Charge Amps for a 48-volt,
350 amp-hour Battery 6–23
Table 6-8 Calculating the Bulk Done Amps for a 24-volt, 700 amp-hour Battery - - 6–24
Table 6-9 Calculating the Bulk Done Amps for a 48-volt, 350 amp-hour Battery - - 6–24
Table 6-10 Inverter Temperature Compensation Calculation using the BTS- - - - - - - 6–26
Table 7-1 Advanced Setup Default Settings for the Sine Wave Plus
2524 and 2548 Models - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7–2
Table 7-2 Advanced Setup Default Settings for the Sine Wave Plus
4024 and 4048 Models - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7–5
Table 7-3 Advanced Setup Default Settings for the Sine Wave Plus Plus 5548 Models 7–7
Table 7-4 Calculating the Float Done Amps for a 24-volt, 700 amp-hour Battery - - 7–16
Table 7-5 Calculating the Float Done Amps for a 48-volt, 350 amp-hour Battery - - 7–16
Table 8-1 LED Summary Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8–9
Table 8-2 User Menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8–11
Table A-1 Derating from continuous power (VA) at elevated ambient temperatures- A–12
Table B-1 User Menu Default and User Settings - - - - - - - - - - - - - - - - - - - - - - - - - B–2
Table B-2 Basic Setup Default and User Settings for the Sine Wave Plus
2524 and 2548 Models - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - B–5
Tables
To Next Page
Loading...
Need help?
General