Xantrex SW Plus 2524 User Manual

Configuration Settings
B–16 976-0043-01-02
26B Load Start Delay Min 00.0 to 25.5 05.0
26C Load Stop Delay Min 00.0 to 25.5 05.0
26D 24-hr Start Volts DC 20.0 to 71.0 49.2
26E 2-hr Start Volts DC 20.0 to 71.0 47.2
26F 15-min Start Volts DC 20.0 to 71.0 45.2
26G Read LBCO 30 sec Start LBCO setting
(11C)
44.0
27 Save/Restore Setup Menu See “27 Save/Restore Settings Menu” on page 7–39 for details.
27A Push INV now to save
Settings
Push INV now to save
Settings
27B Push GEN to restore settings Push GEN to restore settings
27C Push GEN for Factory
Defaults
PUSH GEN for Factory
Defaults
Table B-7 Advanced Setup Default and User Settings for the Sine Wave Plus 5548 Model
Advanced Setup Menus
Sine Wave Plus 5548
User Settings
Range/
Display
Default
Settings

Xantrex SW Plus 2524 Specifications

General

Brand	Xantrex
Model	SW Plus 2524
Category	Inverter
Language	English