CAMERA SYSTEM (LooksCAM) 15 www.xenosys.co.kr
2. Assemble the Control Unit and Battery Pack
1) Match 4 holes of ①Main Body to same 4 hooks of ②Battery Pack and insert.
2) Push ①Main Body to the direction of red arrow and assemble ②Battery Pack.
3) ③The charging port of the main body is very weak at the external shock, so be careful in
handling.
WARNING:
- Charging port is VERY weak at the external shock, so be careful in assembling the battery
pack. If the charging port is broken, the operation of LooksCAM may NOT be possible.
- Store the main body and battery pack with separated to prevent the battery discharging.
To Next Page
Loading...
