Xenosys LooksCAM - Electromagnetic Compatibility

CAMERA SYSTEM (LooksCAM) 32 www.xenosys.co.kr
LED Illumination
Brightness and
STEP
lx @WD400mm
Current Consumption (mA)
1
st
17,000
300
2
nd
27,000
500
3
rd
38,000
700
Field of View Size (mm) @WD400mm
Ø 82 (Standard model)
Weight (g)
35.1
Color Temperature, Spectrum
 6000 K, 400 ~ 700 nm(Visible Ray)
Uniformity
 More than 80% @WD400mm
LED Operating Power
 2W (max.)
LED Lifetime (Guaranteed Time)
 50,000 hours
LED Source
 High Power LED (White Color)
Replacement Components
Battery Pack
 DC7.4V 3000mAh (Lithium Polymer)
PC Power Supply
 Input: 100/240 VAC,50/ 60Hz, 0.5A
 Output: DC12V 1500mA
Dimension & Weight of Total Package
Dimension
 W 410 x H 320 x T 180 (mm)
Total Weight
 3.92 kg
ELECTROMAGNETIC COMPATIBILITY
Electromagnetic Compatibility
It is designed to protect the medical equipment from the harmful interruption. This system occur
electromagnetic interruption within the acceptable range. And, if it is not installed nor used
properly to the direction, it may generate radio wave energy to cause any harmful interruption to
some other equipment around. It cannot guarantee that the interruption will not give any influence
to specific equipments. When the device is powered on, you can find out if it generates
electromagnetic interruption or not.
Recommend to choose one and more ways to solve the trouble in the following ways.
1. Relocate the equipments receiving the interruptive wavelength.
2. Put the each equipment in longer distance.