EasyManua.ls Logo

Xenosys LooksCAM2 - User Manual

Xenosys LooksCAM2
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Doc. No.
F702M-LC2E
Optical Device Medical Device System Engineering
XENOSYS CO., LTD.
2, Venture-ro, 100 Beon-gil, Yeonsu-gu, Incheon 22013, Korea
TEL. 82-32-875-9811~2 FAX. 82-32-875-9813
www.xenosys.co.kr / sales@xenosys.co.kr
LooksCAM2
CAMERA SYSTEM USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the Xenosys LooksCAM2 and is the answer not in the manual?

Summary

Introduction to LooksCAM2 Camera System

Product Overview and Features

Provides a general overview of the LooksCAM2 system and its key features.

Safety and Precautions

General Safety Warnings

Warnings for product safety, power unit, and main body handling.

LED Lens Module and Storage Safety

Safety for LED lens module and environmental conditions for storage.

Battery, Power Supply, and Disposal Warnings

Warnings for battery, DC power supply, and product disposal.

Product Features

Operating Principle, Ratings, and Block Diagram

Explains operating principle, ratings, and provides a system operation block diagram.

System Components

Component Identification and List

Lists and visually identifies all included components of the LooksCAM2 system.

Component Functions - Main Body

Main Body (LC2-CU) Controls and Ports

Details the functions of the main body's buttons, ports, and indicators.

Component Functions - Battery Pack

Battery Pack (BTP-LC2) Features

Describes the battery pack's release knob, hook, USB slot, and status LED.

Component Functions - Head Assembly Unit

Head Assembly Unit (LC2-HA) Components

Details the microphone, lens, clamp, and LED lens module of the head assembly.

Component Functions - Remote Controller

Remote Controller (LC2-RC) Buttons

Explains the functions of each button on the remote controller.

How to Use - Initial Setup

DC Power Supply and Pairing Setup

Covers the DC power supply specifications and remote controller pairing procedures.

Unpacking and Basic Operation Guide

Guides on unpacking, charging, and connecting the main system components.

How to Use - Operation and Maintenance

System Operation and LED Functions

Explains how to operate the system, use LED functions, and manage recording.

Storage and Maintenance Guidelines

Provides instructions for cleaning, storing, and maintaining the product.

Installation - Micro SD Card

Micro SD Card Insertion and Formatting

Details how to insert, remove, and format the Micro SD card.

Micro SD Card Usage Warnings

Lists important warnings and recommendations for using the Micro SD card.

Installation - Assembly and Charging

Assembling Main Body and Battery Pack

Step-by-step guide to connect the main body and battery pack.

Battery Charging Instructions

Explains how to charge the battery pack using the USB slot and power supply.

Installation - Connections and Cables

Connecting Head Assembly Unit

Guides on connecting the head assembly unit to the main body.

Head Assembly Unit Cable Warnings

Highlights potential issues and warnings related to the head assembly unit cable.

Installation - Ports and Firmware

Video-Out Port Connection

Instructions for connecting the video-out port to a TV or monitor.

Firmware Update Procedure

Steps to update the device firmware using a Micro SD card.

Operating Instructions - Power and Initialization

Powering On;Off and Initialization

Details how to power the device on and off, and system initialization.

Hold Function and SD Card Check

Explains the hold function and checks for SD card status during operation.

Operating Instructions - Recording and Snapshot

Video Recording Process

Step-by-step guide to start and stop video recording.

Taking Snapshots and SD Card Warnings

Instructions for taking snapshots and warnings related to SD card capacity.

Operating Instructions - LED and Settings

LED Light Control and Brightness

How to turn the LED light on/off and adjust brightness levels.

Configuring LED Brightness via Software

Using the config.exe file to set LED brightness and other configurations.

Operating Instructions - Advanced Functions

Highlight Tag and Auto Focus

Functionality for tagging moments and automatic focus adjustment.

Zoom Control and Video Output Check

How to use zoom functions and check video output.

Operating Instructions - Battery Status

Battery Status LED Indicators

Explains the meaning of different battery status LED colors and operating times.

Video-Out Port Usage Warning

Warning regarding system malfunction when using the video-out port.

Using the Viewer - WiFi Connection

WiFi Connection Setup

Steps to connect the main body to a tablet PC via WiFi.

Using the Viewer - Application and Interface

Viewer Application Installation

Instructions for installing the LooksCAM2 viewer application on mobile devices.

Viewer Interface and Controls

Overview of the viewer application's screen layout and interactive controls.

Using the Viewer - Configuration Options

WiFi and Language Settings

Configuring WiFi modes (AP/Station) and language settings for the control unit.

Image and Focus Settings

Adjusting image control, lens selection, and auto-focus modes.

Using the Viewer - Menu and Advanced Settings

Resolution and LED Light Settings

Configuring video resolution and LED light brightness.

MIC, Speaker, and Menu Button Functions

Adjusting audio levels and understanding menu button operations.

Basic Troubleshooting

Troubleshooting Symptom-Repair Table

Provides solutions for common issues like power, charging, and button input problems.

Data Backup and After-Sales Service

Important notes on backing up data before service and after-sales support.

Specifications - Measurement

Control Unit and Battery Pack Dimensions

Physical dimensions and weight of the control unit and battery pack.

Head Assembly and Remote Controller Dimensions

Physical dimensions and weight of the head assembly unit and remote controller.

Specifications - Accessories

DC Power Supply and USB Cable Specs

Details specifications for the DC power supply and USB power cable.

Video-Out Cable Specifications

Provides measurement and weight for the video-out cable.

Specifications - Performance

Detailed Electrical and Video Specs

Comprehensive specifications for resolution, video quality, WiFi, and compression.

Operating Conditions and Charging Time

Specifies operating temperature, recording time, and full charging capacity.

Specifications - Labels and Components

Lens Specifications and Component Labels

Field of view, weight, color temperature, and LED operating power specs.

Packaging Labeling and Manufacturer Information

Details on outer box labeling, product rating, and manufacturer contact information.

Electromagnetic Compatibility

Compatibility and Interference Guidelines

Explains the system's electromagnetic compatibility and ways to solve interference.

Transportation

Transportation Protection and Handling

Guidelines for protecting and handling the product during transportation.

Storage

Storage Conditions and Battery Care

Recommended environmental conditions for storage and battery maintenance.

Cleaning Instructions

Cleaning Procedures and Precautions

Proper methods for cleaning the LED lens module and camera lens.

Services and Warranty

Service and Limited Warranty Terms

Details on service provisions, warranty applicability, and exclusions.

Revision History

Document Revision Log

Records the version number, release date, and revision status of the manual.

Xenosys LooksCAM2 Specifications

General IconGeneral
BrandXenosys
ModelLooksCAM2
CategoryDigital Camera
LanguageEnglish