Xenosys LooksCAM2 - Cleaning Instructions; Cleaning Procedures and Precautions; Services and Warranty; Service and Limited Warranty Terms

CAMERA SYSTEM (LooksCAM2) 39 www.xenosys.co.kr
CLEANING INSTRUCTIONS
1. Clean up the surface of LED lens module & camera lens by soft cloth with neutral detergent
regularly to remove dirt, and leave it dry for usage.
2. Do not use volatile chemicals like benzene, alcohol, thinner, and acetone for cleaning. If there
is any contact of these chemicals to the surface, clean it by soft cloth dipped with neutral
detergent. However, the manufacturer is not responsible for any defect caused by these
chemicals.
3. Do not expose the equipment to the sterilizing or cleaning process with excessive temperature
and humidity. In case of the exposure, it will cause the damage to the equipment and out of
warranty. Especially, inside parts of the main body do not allow the contact of any liquid.
SERVICES & WARRANTY
1. This service & warranty statement applies to all countries to the extent that there is no special
warranty rule.
2. All services & warranty should be provided by Xenosys Co., Ltd. or authorized personnel by
Xenosys Co., Ltd.
3. Warranty becomes effective from the sales date for material, production defective, or defect under
the normal use. Thus the warranty period starts from the first purchaser’s sales date. Warranty
will not be applied for abuse, improper use, negligence, improper installation, and operation or
any remodeling, adjustment and modification by unauthorized personnel or technician. Refer to
the warranty period in line #13.
4. The warranty period of the battery pack and Micro SD card (expendables) is 6 months from the
date of purchase.
5. Exchanged or any broken part after repair become to the property of Xenosys Co., Ltd.
6. There is no extended or renewed warranty period after the repair or replacement is done.
7. No warranty will be applied in case of the modification or personalized part by customer’s request.
8. No warranty will be applied in case of no serial number or hard to detect the proper one.
9. Changes in this limited warranty require the previous approval from Xenosys Co., Ltd.
10. If there is any defect happens which cannot be handled by troubleshooting in this manual, return
it to the manufacturer. Then Xenosys will take care of it. If the qualified engineer determines that
the defect comes from the abuse or improper use, warranty will not be applied. The repair cost
shall be notified prior to the service & repair work starts.
11. Before sending the equipment need for repair, contact the manufacturer or distributor. Then the
manufacturer or distributor will report details with RMA No. and related reference which will make
easier to track.
12. There are no user serviceable parts in this product. Please send the product to the distributor
(dealer) for servicing. Technical description or manual is available upon request.
13. Warranty Period of LooksCAM
1) LooksCAM (except the battery & non-Xenosys provided parts): 1 year