Xenosys LooksCAM2 - Component Functions - Head Assembly Unit; Head Assembly Unit (LC2-HA) Components

CAMERA SYSTEM (LooksCAM2) 12 www.xenosys.co.kr
④ Clamp
⑤
Camera lens
(f14mm standard)
⑥ LED Lens Module
②Adjustable link `
①
Microphone
③Recording status LED
WARNING:
1. ③USB slot of battery pack should be only used for charging usage, and it cannot be
used during the usage of camera.
2. There is protector PCB for this battery pack so when charging via USB slot after 7 hours
charging, it will stop charging.
3. Head Assembly Unit (LC2-HA)
Each Part
Function
① Microphone
Microphone Input
② Adjustable Link
To move up or down of camera head assembly unit
③ Recording Status LED
LED ON: Stand By status
LED Blinking: Recording is in process
LED OFF: System initialization or Camera sensor connection error.
④ Clamp
To fix at rigid headband (RHB02)
⑤ Camera Lens
Choose your desired lens between f=14mm, f=20mm depending on FOV.
Field of View (Crosswise)
f=14mm : 137mm @ WD400mm (Basic set up)
f=20mm : 94mm @ WD 400mm
⑥ LED Lens Module
. There are 3 kinds of LED lens and you may choose one.
Class
Model
Feature (Field of View Size)
Remark
Standard
LLM82
Ø 82mm@WD400mm
Standard
Option 1
LLM74
Ø 74mm@WD400mm
Option 2
LLM66
Ø 66mm@WD400mm
A180138
⑦ Serial Number