EasyManua.ls Logo

Xenosys LooksCAM2 - Introduction to LooksCAM2 Camera System; Product Overview and Features

Xenosys LooksCAM2
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAMERA SYSTEM (LooksCAM2) 4 www.xenosys.co.kr
TRANSPORTATION ............................................................................................... 38
STORAGE ................................................................................................................ 38
CLEANING INSTRUCTIONS .................................................................................. 39
SERVICES & WARRANTY ...................................................................................... 39
INTRODUCTION
This product is the external medical camera to record
patients affected area or surgery during the medical
treatment by hospital. The basic components consist
of the camera optical module, camera head, camera
control unit (main body), and LED lens module.
There are two options to check the input video
through camera head spontaneously. One is to
connect VIDEO OUT port of the camera control unit
to HDMI port of the monitor. Another is to use wifi
setting by monitor or computer screen.
Recorded video file is stored in Micro SD card.
Here are summarized features of this product.
1. There is no limit in movement as it is wearable camera.
2. Possible to record shadow less video as the light & the line of sight from the operator is same.
3. Big depth of focus will provide the good focus while operation.
4. The advantage of the view point from the operator when trainees see recorded videos.
5. Use only light source if you do not use recording.
The description below is KFDA approval condition as the medical device.
Registration No.
1909
Certificate
No.
Gyeongin Jesin 07-117
Product Category
I
General Instruments
Class
Class 1
Product Category
II
A31000 Medical Mirror
Product
Category III
A31020.01 External Medical
Camera