Xenosys LooksCAM2 - Using the Viewer - Menu and Advanced Settings; Resolution and LED Light Settings; MIC, Speaker, and Menu Button Functions

CAMERA SYSTEM (LooksCAM2) 30 www.xenosys.co.kr
WARNING:
- When lots of wifi channels around are duplicated, wifi signal can be lower and disconnected on
real time video. Then download Wifi Analyzer or etc. application to diagnose not congested channel
to move and apply to LooksCAM2.
(3) Resolution: Set up for resolution 1080p or 720p
(4) Image Control: Set up for image color by manual or automatic (Recommend for automatic)
(5) Lens
１) Input the 3 digit of product ID code which is marked at LC2-HA lens (Ex, A180138 => input 138)
２) If LC2-HA has been changed, make sure to input new serial number.
(6) AF Mode
１) Continuous: Automatic focus according to the user’s movement
２) Manual(Fixed Mode): Fixed focus at user’s selected WD(cm)
３) At manual mode, press AF button, then it will focus on special object.
４) At manual mode, press & hold AF button, then it will focus on set up WD at “AF Mode” of viewer
setting.
(7) LED LIGHT: Set up the brightness of LC2-CU during the booting process.
(8) MIC, Speaker: Adjust main body microphone and speaker volume.
5. Button Details on Menu
SSID
Minimum digit
6
Maximum digit
12
Allowed letters
English: a-z, A-Z
Number: 1-0
Special character: '_',
Password
Minimum digit
8
Maximum digit
12
Allowed letters
English: a-z, A-Z
Number: 1-0
Special character: '_',
Channel
Choose from 1-11. ”0” is automatic channel.