Xenosys LooksCAM2 - Specifications - Performance; Detailed Electrical and Video Specs; Operating Conditions and Charging Time

CAMERA SYSTEM (LooksCAM2) 35 www.xenosys.co.kr
2. Detailed Specifications
Specification
Rated Input Voltage
 DC3.6V
Image Sensor
 1/3 inch 4.0M Pixel CMOS
Recording Resolution
 Full HD 1920*1080p
FOV (Crosswise)
 f14mm Lens : Ø137mm @ WD 400mm
 f20mm Lens : Ø 94mm @ WD 400mm
Recording Frame
 30fps
Video Quality (Bitrate)
 CBR type 10 Mbps
WiFi streaming
 Rec (EIS) + WiFi: 1920*1080/30fps, delay 1.8sec.
 Rec (EIS) + WiFi + HDMI: 480*360p / delay 1.8sec
Digital Zoom
 1.0x 1.5x 2.0x 3.0x
Video Compression
 H.264
Audio Codec
 AAC (Advanced Audio Coding), 12 KHz
Function Button
 REC/Snap shot/LED
Speaker
 Built-in 8 ohm
Micro SDHC Card
 128GB Micro SDHC Card, More than Class 10, MLC Type
 File System: FAT32, File Allocation Size: 32KB
 File Length: 30 minutes (About 2.5GB)
Operating Temperature /
Storage Temperature
 6℃ - 40℃ / 10℃ - 40℃
Consecutive Recording Time
(LED light 3 step, WiFi On status)
 4 hours 20 minutes
 LED 2 step: 6 hours 20 minutes
 LED 1 step: 7 hours 20 minutes
Full Charging Time (Capacity)
 6 hours (10.50 Ah)
Input power of
DC POWER SUPPLY
 100-240 V~, 50-60 Hz, 0.3A
Output power of
DC POWER SUPPLY
 5.0V 2.2A
Battery Input Power
 5.0V 2.2A
LED Illumination
Brightness &
Current Consumption
STEP
lx @WD400mm
1
st
19,000
2
nd
30,000