Xenosys LooksCAM2 - LED Lens Module and Storage Safety

CAMERA SYSTEM (LooksCAM2) 6 www.xenosys.co.kr
Storage Environment (Operating)
Ambient Temperature
6℃ - 40℃(43℉ - 104℉)
Relative Humidity
30 - 85% at 6℃ - 40℃(43℉ - 104℉)
Pressure
860 hPa - 1060 hPa
Transportation & Storage Environment (Non-operating)
Ambient Temperature
10℃ - 40℃
WARNING for LED Lens Module:
 Never disassemble or undertake modification of the equipment.
 Do not put any metal or flammable object into the main body. It may cause fire or electric
shock.
 Any drop or hard shock may cause the potential damage to the equipment.
 Do not use or store the equipment in the area where get the direct ray of light, humidity, dust
or soot. Clean up with a dry and soft cloth.
 Do not use the detergent or chemical fluid to clean which may cause discoloration.
 Avoid the reach of children or pets.
 Maintain the following conditions for storing the product.
 Do not drop, crush, or put a high pressure on LED lens module.
 Clean LED lens surface with dipped alcohol or methanol in dry cloth softly.
 Do not bend or twist the connection cable between the main body and LED lens module which
may cause the defective.
 LED optic outside emits heat, so be careful on touching.
 Do not look directly into LED lens module or some one’s eyes to avoid the risk of permanent
eye damage.
 Refer to the below label for the caution.