Xerox 700 Digital Color Press User Guide 7-3
Maintenance
To ensure optimum print quality at all times,
regularly clean the glass areas of your
machine. This helps avoid output with streaks,
smears, and other marks that transfer from the
glass area when scanning documents.
Cleaning Your Machine
WARNING: When cleaning your machine do
NOT use organic or strong chemical solvents or
aerosol cleaners. Do NOT
pour fluids directly onto
any area. Use supplies and cleaning materials
only as directed in this documentation. Keep all
cleaning materials out of the reach of children.
CAUTION:
Do NOT remove the covers or guards that are
fastened with screws. You cannot maintain or
service any of the parts that are behind these
covers and guards. Do NOT attempt any
maintenance procedure that is NOT specifically
described in the documentation supplied with
your machine.
WARNING: Do not use pressurized air-spray
cleaning aids on or in this equipment. Some
pressurized air-spray containers contain explosive
mixtures and are not suitable for use in electrical
applications. Use of such cleaners can result in a
risk of explosion and fire.
Use a lint-free cloth, lightly dampened with
Xerox Anti-Static or General Cleaning Fluid or
another suitable non-abrasive glass cleaner, to
clean the glass area.
Use a lint-free cloth, lightly dampened with
water, Xerox Cleaning Fluid or Xerox Film
Remover, to clean the under side of the
Document Cover and in the Document Handler.
To Next Page
Loading...
Need help?
General
