Xerox 700 User Manual

Xerox 700 Digital Color Press User Guide
Accessories
10-7
Close the HCS Front Cover.
3.
4.
HCS Top Tray Jam (E7)
Open the HCS Front Cover.
Follow the instructions located inside the Front
Cover to clear the E1, E2, or E3 jam.
1.
Perform the following steps to clear the HCS Top
Tray jam and resume printing.
Remove the jammed paper from the Top Tray.
2.
Follow the instructions displayed on the digital press
UI to resume printing.
5.
4.
HCS Exit Jam (E8)
Open the HCS Front Cover.
Follow the instructions located inside the Front
Cover to clear the E8 jam.
1.
Perform the following steps to clear the HCS Exit
jam and resume printing.
Lift the green handle and/or rotate the green knob
and remove all paper in the exit area.
2.
5.
Close the HCS Front Cover.
3.
Follow the instructions displayed on the digital press
UI to resume printing.
If the UI indicates there is a jam in the digital press,
follow the instructions on the screen to remove any
paper in the area indicates. Refer to the Jam
Clearance section in the Problem Solving chapter in
this manual.
If the UI indicates there is a jam in the digital press,
follow the instructions on the screen to remove any
paper in the area indicates. Refer to the Jam
Clearance section in the Problem Solving chapter in
this manual.

Xerox 700 Specifications

General

Resolution	2400 x 2400 dpi
Processor	1.2 GHz
Monthly Duty Cycle	300, 000 pages
Media Types	Paper, Envelopes, Labels, Transparencies
Connectivity	Ethernet, USB
Duplex Printing	Standard
Memory	2 GB
Operating System Compatibility	Windows, Mac OS
Print Speed	70 ppm
Media Weight	40 to 300 gsm