Xerox 700 - Page 95

Xerox 700 Digital Color Press User Guide 4-53
Copy
Delete Outside / Delete Inside - Area 1
SaveCancel
To define an area, enter the 2
coordinates within a range of 0 -
432mm measuring from the top right
corner of the document.
Each area is defined by
the coordinates of two
diagonally opposite
corners.
Clear Area 1
Delete Outside / Delete Inside - Area 1
SaveCancel
To define an area, enter the 2
coordinates within a range of 0 -
432mm measuring from the top right
corner of the document.
Each area is defined by
the coordinates of two
diagonally opposite
corners.
Clear Area 1
Use the Delete Outside/Delete Inside - Area
screen to define each of the areas you want to
use as targets for deletion. To define an area,
enter the two coordinates (x,y) within a range
of 0.0 - 17.0 inches measuring from the top
right corner of the document. You can
navigate from coordinate to coordinate by
touching the Y1, Y2, X1, X2 buttons. When
you have defined all coordinates, press the
Save button.
You can clear a deletion area by selecting the
Clear Area 1, Clear Area 2, or Clear Area 3
buttons. When all of your areas are defined,
touch the Save button.
Select the Save button to continue.
This completes the Delete Outside/Delete
Inside topic.