Xerox AltaLink C8130 Series User Manual

WASTE CONTAINER
Replacing the Waste Container
When it is time to replace the waste container, a message appears on the control panel.
When you replace the waste container, clean the printhead lenses. For details, refer to Cleaning the Printhead
Lenses.
CCaauuttiioonn:: Spread paper on the floor to catch possible toner spills.
WWaarrnniinngg:: If you spill any toner in the printer, wipe it up using a moist cloth. Never use a vacuum cleaner
to remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.
WWaarrnniinngg:: If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some
toner remains on your clothes, use cool water, not hot, to rinse off the toner. If toner gets on your skin,
wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out immediately with
cool water and consult a doctor.
Note: Each waste container includes installation instructions.
To replace the waste container:
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
1. Open the front cover of the printer.
250 Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
Maintenance

Xerox AltaLink C8130 Series Specifications

General

Maximum Paper Capacity	5, 140 sheets
Copy Resolution	Up to 600 x 600 dpi
Fax	Optional
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Memory	4 GB
Type	Color Multifunction Printer
Fax Resolution	Up to 400 x 400 dpi
Display	10.1-inch color touchscreen
Print Speed	Up to 30 ppm
Connectivity	Ethernet, USB 3.0
Hard Drive	320 GB (optional)
Functions	Print, Copy, Scan, Fax (optional)
Copy Speed	Up to 30 cpm (black/white and color)
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Dimensions	640 x 699 x 1, 147 mm