Xerox AltaLink C8130 Series - Page 266

7. Place the new transfer roller in the printer as shown. Press down until the transfer roller clicks into place.
8. Remove the protective cover from the transfer roller, then close Door A.
FAN FILTER
Replacing the Fan Filter
When it is time to replace the fan filter, the printer displays a message on the control panel.
1. Remove the new fan filter from the packaging. Retain the packaging.
2. To remove the fan filter cover, press down on the R9 cover release tab, then lift the cover away from the printer.
266 Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
Maintenance