3. To remove the fan filter, grasp the orange tab and pull it toward you. Pull the fan filter out of the printer.
CCaauuttiioonn:: When you replace the fan filter, be careful not to spill any toner residue. If any toner spills,
avoid contact with clothes, skin, eyes, and mouth.
4. Place the used fan filter in the plastic bag. Dispose as normal office waste.
5. To insert the new fan filter, grasp the orange tab, then push the fan filter into the slot until it stops.
6. Replace the fan filter cover.
7. To confirm that you replaced the fan filter, when the confirmation message appears, touch YYeess.
Note: If the confirmation message does not appear, to generate the message, open, then close, the front
door of the printer.
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide 267
Maintenance
To Next Page
Loading...
