Xerox C410 - Remote Operator Panel; Notifications

REMOTE OPERATOR PANEL
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
EExxtteerrnnaall VVNNCC CCoonnnneeccttiioonn
• Don’t Allow*
• Allow
Connect an external Virtual Network Computing (VNC)
client to the remote control panel.
AAuutthheennttiiccaattiioonn TTyyppee
• None*
• Standard Authentication
Set the authentication type when accessing the VNC
client server.
VVNNCC PPaasssswwoorrdd Specify the password to connect to the VNC client
server.
Note: This menu item appears only if
Authentication Type is set to Standard
Authentication.
Note: An asterisk (*) next to a value indicates the factory default setting.
NOTIFICATIONS
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
SSuupppplliieess
• Show Supply Estimates
– Show estimates*
– Do not show estimates
• Custom Supply Notifications
Show the estimated status of the supplies.
EE--mmaaiill AAlleerrttss SSeettuupp
• E-mail Setup
– Primary SMTP Gateway
– Primary SMTP Gateway Port (25*)
– Secondary SMTP Gateway
– Secondary SMTP Gateway Port (25*)
– SMTP Timeout (30 seconds*)
– Reply Address
– Always use SMTP default Reply Address (Off*)
– Use SSL/TLS(Disabled*)
– Require Trusted Certificate (On*)
– SMTP Server Authentication (No
authentication required*)
Configure the e-mail settings of the printer.
Xerox
®
C410 Color Printer User Guide 101
Use Printer Menus