Xerox C410 - SNMP

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
OOuuttbboouunndd TTrraaffffiicc MMaaxxiimmuumm SSppeeeedd
• Off*
• On
Set the maximum transfer rate of the printer.
Note: When enabled, the option for this setting
is 100–1000000 Kilobits/second.
TTLLSS SSuuppppoorrtt
• TLSv1.3 is supported by default
• Enable TLSv1.0 (Off)
• Enable TLSv1.1 (Off*)
• Enable TLSv1.2 (On*)
Enable the Transport Layer Security protocol.
SSSSLL CCiipphheerr LLiisstt Ready Only list of cipher algorithms used for the TLS
connections.
TTLLSSvv11..33 SSSSLL CCiipphheerr LLiisstt Ready Only list of cipher algorithms used for TLSv1.3
connections.
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Xerox
®
C410 Color Printer User Guide 135
Use Printer Menus