Xerox C410 - TCP;IP

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
Note: When this setting is disabled, the printer
does not examine incoming data and uses the
default printer language specified in the Setup
menu.
JJoobb BBuuffffeerriinngg
• Off*
• On
Temporarily store print jobs in the hard disk before
printing.
Note: This menu item appears only when a
hard disk is installed.
MMaacc BBiinnaarryy PPSS
• Auto*
• On
• Off
Set the printer to process Macintosh binary PostScript
print jobs.
Note:
• Auto processes print jobs from computers
using either Windows or Macintosh
operating systems.
• Off filters PostScript print jobs using the
standard protocol.
EEnneerrggyy EEffffiicciieenntt EEtthheerrnneett
• Off
• On
• Auto*
Reduce power consumption when the printer does not
receive data from the Ethernet network.
Note: An asterisk (*) next to a value indicates the factory default setting.
TCP/IP
Note: This menu appears only in network printers or printers attached to print servers.
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
SSeett HHoossttnnaammee Set the current TCP/IP host name.
DDoommaaiinn NNaammee Set the domain name.
AAllllooww DDHHCCPP//BBOOOOTTPP ttoo uuppddaattee NNTTPP sseerrvveerr
• On*
• Off
Allow the DHCP and BOOTP clients to update the NTP
settings of the printer.
ZZeerroo CCoonnffiigguurraattiioonn NNaammee Specify a service name for the zero configuration
network.
EEnnaabbllee AAuuttoo IIPP
• Off*
• On
Assign an IP address automatically.
Xerox
®
C410 Color Printer User Guide 133
Use Printer Menus