Xerox C410 - Linking trays

• Load the labels face up in the tray, then adjust the length and width of the paper guides to fit the labels.
5. From the Paper menu in the control panel, set the paper size and paper type to match the paper loaded in the
multipurpose feeder.
LINKING TRAYS
1. From the home screen, touch SSeettttiinnggss >> PPaappeerr >> TTrraayy CCoonnffiigguurraattiioonn select a paper source.
2. Set the same paper size and paper type for the trays that you are linking.
3. From the home screen, touch SSeettttiinnggss >> DDeevviiccee >> MMaaiinntteennaannccee >> CCoonnffiigguurraattiioonn MMeennuu >> TTrraayy
CCoonnffiigguurraattiioonn >> TTrraayy LLiinnkkiinngg.
4. Touch AAuuttoommaattiicc.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
WWaarrnniinngg:: The temperature of the fuser varies according to the specified paper type. To avoid printing
issues, match the paper type setting in the printer with the paper loaded in the tray.
68
Xerox
®
C410 Color Printer User Guide
Set up, Install, and Configure