Xerox C410 - Wireless

WIRELESS
Note: This menu is available only in printers connected to a Wi-Fi network or printers that have a wireless
network adapter.
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
SSeettuupp OOnn PPrriinntteerr PPaanneell
• Choose Network
• Add Wi-Fi Network
– Network Name
– Network Mode
– Infrastructure
– Wireless Security Mode
– Disabled*
– WEP
– WPA2/WPA - Personal
– WPA2 - Personal
Configure the Wi-Fi connection using the control panel.
WWii--FFii PPrrootteecctteedd SSeettuupp
• Start Push Button Method
• Start PIN Method
Establish a Wi-Fi network and enable network security.
Note:
• Start Push-Button Method connects the
printer to a Wi-Fi network when buttons on
both the printer and the access point
(wireless router) are pressed within a given
time.
• Start PIN Method connects the printer to a
Wi-Fi network when a PIN on the printer is
entered into the wireless settings of the
access point.
NNeettwwoorrkk MMooddee
• BSS Type
– Infrastructure*
Specify the network mode.
CCoommppaattiibbiilliittyy
• 802.11b/g/n (2.4GHz)
*
• 802.11a/b/g/n/ac (2.4GHz/5GHz)
• 802.11a/n/ac (5GHz)
Specify the standard for the Wi-Fi network.
Note: 802.11a/b/g/n/ac (2.4GHz/5GHz) and
802.11a/n/ac (5GHz) only appear when a Wi-Fi
option is installed.
WWiirreelleessss SSeeccuurriittyy MMooddee
• Disabled
*
• WPA2/WPA-Personal
• WPA2-Personal
• WPA2/WPA3-Personal
Set the security mode for connecting the printer to
Wi-Fi devices.
Xerox
®
C410 Color Printer User Guide 127
Use Printer Menus