Xerox D110

049-115
Cause: Stacker sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-116
Cause: Stacker sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-117
Cause: Bypass path sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-119
Cause: Bypass path sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-121
Cause: Stacker exit sensor jam
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-210
Cause: HCS front door sensor fault
User Guide20-12
High Capacity Stacker (HCS)