Note
If paper is torn, check inside the machine and remove it.
4. Return the opened lever ( 2g) to its original position, and close the output tray ( 2d).
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Paper jams at unit 4 and knob 4a
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Pull out unit 4.
User Guide22-26
Standard/Booklet Maker Finisher
To Next Page
Loading...
