3. Pull the container out of the finisher ( R4).
4. Discard all the punch scraps in an appropriate container.
5. Reinsert the empty container into the machine.
6. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Finisher problem solving
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
22-13Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
