Note
Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.
Paper jams in Tray 8/T1 (Post-Process Inserter)
1. Press the Cover button.
2. Open cover 1e and then remove the jammed paper and all paper loaded in the tray.
Note
If paper is torn, check inside the machine and remove it.
3. Fan the paper you removed, making sure that all four corners are neatly aligned, and
then load them again.
4. Push cover 1e until you hear it click into place.
Note
A message is displayed and the machine does not operate if the cover is open even
slightly.
User Guide22-14
Standard/Booklet Maker Finisher
To Next Page
Loading...
