5. Reinsert the empty container into the machine.
6. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Problem solving
Paper jams in the Finisher Module
Paper jams in Tray 8/T1 (Post-Process Inserter)
1. Press the Cover button.
2. Open cover 1e and then remove the jammed paper and all paper loaded in the tray.
24-13Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Standard Finisher Plus
To Next Page
Loading...
