6. Reinstall the cartridge unit to its original position in the finisher.
7. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Staple jams in the booklet maker cartridge
Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. While pressing the lever to the right, pull out the booklet staple cartridge unit.
User Guide22-32
Standard/Booklet Maker Finisher
To Next Page
Loading...
Need help?
General