2. Open the right cover on the finisher.
3. Pull out the folder output tray ( 2d), swing lever the 2g, and remove the jammed
paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the opened lever ( 2g) to its original position, and close the output tray ( 2d).
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
24-27Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Standard Finisher Plus
To Next Page
Loading...
