Xerox D136 - Page 250

078-278
Cause: An OHCF tray has malfunctioned.
Remedy: Perform the following:
1. Check the paper loaded in the trays.
2. Power Off/On the machine.
3. If problems persist, contact the Customer Support Center.
Note
Trays other than the OHCF trays may be used in the interim.
078-279
Cause: An OHCF tray has malfunctioned.
Remedy: Perform the following:
1. Check the paper loaded in the trays.
2. Power Off/On the machine.
3. If problems persist, contact the Customer Support Center.
Note
Trays other than the OHCF trays may be used in the interim.
078-280
Cause: An OHCF tray has malfunctioned.
Remedy: Perform the following:
1. Check the paper loaded in the trays.
2. Power Off/On the machine.
3. If problems persist, contact the Customer Support Center.
Note
Trays other than the OHCF trays may be used in the interim.
078-300
Cause: An OHCF tray has malfunctioned.
Remedy: Perform the following:
1. Check the paper loaded in the trays.
2. Power Off/On the machine.
3. If problems persist, contact the Customer Support Center.
Note
Trays other than the OHCF trays may be used in the interim.
078-301
Cause: An OHCF tray has malfunctioned.
User Guide18-20
Oversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)