EasyManuals Logo

Xerox D136 User Manual

Xerox D136
460 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #374 background imageLoading...
Page #374 background image
Remedy: Check staples and reset correctly.
024-979
Cause: The staple cartridge is empty
Remedy: Check staples. Follow procedures to remove and replace staple cartridge.
024-980
Cause: The stacker tray is full
Remedy: Remove all paper from the stacker tray.
024-981
Cause: The top tray is full.
Remedy: Remove all paper from the finisher top tray.
024-982
Cause: The finisher stacker tray lower safety warning in on
Remedy: Remove all paper from the stacker tray and remove any other obstructions.
024-983
Cause: The finisher booklet tray is full
Remedy: Remove all paper from the booklet tray.
024-984
Cause: The booklet stapler low staple signal is on
Remedy: Remove all paper from the booklet tray.
024-985
Cause: The booklet stapler low staple signal is on
Remedy: Remove all paper from the booklet tray.
024-987
Cause: The booklet folder tray is full
Remedy: Remove all paper from the tray. Set the output tray for three fold.
024-988
Cause: The booklet folder tray is full
Remedy: Check that the folder tray is correctly attached and set.
024-989
Cause: There is a problem with the booklet maker stapler
Remedy: Check the staple cartridge and reset correctly.
047-320
Cause: A communication error has occurred with the finisher
Remedy: Perform the following:
User Guide22-46
Standard/Booklet Maker Finisher

Table of Contents

Other manuals for Xerox D136

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox D136 and is the answer not in the manual?

Xerox D136 Specifications

General IconGeneral
BrandXerox
ModelD136
CategoryCopier
LanguageEnglish

Related product manuals