DocuMate 272 Scanner User’s Guide 15
Installation
Your computer then recognizes that a scanner has been
plugged into the USB port and automatically loads the
appropriate software to run the scanner.
Do not proceed until you receive a message that your computer
has found the new hardware, or updated the driver database. If
your computer is running Windows XP, you will see the
following message.
2. When you’re certain that the software has completely loaded,
return to the “Complete the installation by connecting your
hardware” window and click OK to complete the installation
process.
You can also click More to see a quick overview about
accessing and navigating the One Touch Button Panel. When
you’re finished reading the additional information, click OK.
The scanner’s status light is green when the scanner and
computer are communicating properly.
To Next Page
Loading...
Need help?
General