Replacing Staples in the Business Ready Finisher
Replacing Staples in the Main Stapler of the Business Ready Finisher
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the Business Ready finisher.
2. Hold the stapler assembly by the orange lever R1 and push it to the right.
3. To remove the staple cartridge, grasp the orange handle, then pull it firmly toward you.
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide 235
Maintenance
To Next Page
Loading...
