PAPER TYPES
This product can be used to print on both recycled and virgin paper, approved to an environmental stewardship
scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper (60 g/m²), which contains
less raw material and thus saves resources per print, may be used in certain applications. We encourage you to
check if this is suitable for your printing needs.
ENERGY STAR
The ENERGY STAR program is a voluntary scheme to promote the development and
purchase of energy efficient models, which help to reduce environmental impact. Details
on the ENERGY STAR program and models qualified to ENERGY STAR can be found at the
following website: www.energystar.gov.
The ENERGY STAR and ENERGY STAR mark are registered United States trademarks.
The ENERGY STAR Imaging Equipment Program is a team effort between United States,
European Union, and Japanese governments and the office equipment industry to
promote energy-efficient copiers, printers, fax, multifunction printers, personal computers,
and monitors. Reducing product energy consumption helps combat smog, acid rain, and
long-term changes to the climate by decreasing the emissions that result from generating
electricity.
POWER CONSUMPTION AND ACTIVATION TIME
The amount of electricity that a device consumes depends on the way the device is used. This device is designed
and configured to enable you to reduce your electricity usage.
Power Saver modes are enabled on your device to reduce energy consumption. After the last print, the device
transitions to Ready mode. In this mode, the device can print again immediately. If the device is not used for a
specified period, the device transitions to Sleep mode. In these modes, to enable reduced-power consumption, only
essential functions remain active. The device takes longer to produce the first print after it exits the Power Saver
modes than it takes to print in Ready mode. This delay is the result of the system waking up and is typical of most
imaging devices on the market.
To save power, you can enable Auto Power Off mode on your device. If Auto Power Off mode is enabled, you can
configure the mode as follows:
• AAllwwaayyss AAlllloowweedd: The device powers off automatically after the specified time and the Sleep mode timeout has
elapsed.
• AAlllloowweedd OONNLLYY WWhheenn CCoonnddiittiioonnss aarree MMeett: The device automatically powers off only after timeouts have
elapsed. The device also powers off if Fax, USB Drive, and Wired and Non-Wired Network have not been
activated.
To change the Power Saver settings, refer to the User Guide. For further assistance, contact your System
Administrator or refer to the System Administrator Guide.
To enable Auto Power Off mode, contact your System Administrator. For details, refer to the System Administrator
Guide.
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide 333
Regulatory Information
To Next Page
Loading...
