MFF Pro PlusMFF Professional
200 sheets of 20 lb bond (75 gsm)
or equivalent
52-220 gsm
Delivers output to all 3 trays
Not availableInsertion Tray
Same3000 sheets of 20 lb bond (75 gsm)
or equivalent
The stack limit can be set from the
UI for each BFM independently.
Stapled sets with <15 sheets are lim-
ited to 100 sets.
The Stacker is the output tray for re-
ceiving compiled stapled and un-
stapled sets as well as single sheets.
Output is normally delivered with
side-1 down and sets can be offset.
Main Tray/Stacker Capacity
SameUp to 100 sheets of 20 lb bond (75
gsm) (one or two staples) or equival-
ent substrates(reducedstapledsheet
capabilities can result based on sub-
strate properties (i. e. thickness,
density, material, coating, etc.)
Includes two internal pass-through
100 sheet upside down staplers. The
stapler devices have the ability to
portrait, landscape or dual staple all
supported paper sizes. Finished sets
can be stacked internally to the lower
stacker tray.
If either of the Staplers runs out of
staples see Replacing Staples in the
BFM or if it jams see Clearing Stapler
Jams.
An alternate Staple Cartridge for up
to 30 sheets of 20lb is available. (75-
80 gsm) paper capacity. Contacting
Xerox for information on ordering
refills.
Each Stapler Cartridge holds 5000
staples. Contacting Xerox for inform-
ation on ordering refills.
Stapler Capacity
Same8.26 in to 18.5 in (210 mm to 457
mm)
8.26 in to 12 in (210 mm to 305 mm)
Paper Size Range
process direction
cross process direction
Same16 lb bond to 113 lb index (52 to 220
gsm)
No coated stock
Stock Weight Range
uncoated:
coated:
Xerox
®
Nuvera
®
21-12
User Guide and Training Aid (UGTA)
Machine Specifications
To Next Page
Loading...
Need help?
General