Xerox Phaser 3150

Disassembly
5-18
5.12 Fan
1. Remove the front cover, see "5.2 Front Cover" on page 5-3.
2. Remove the rear cover, see "5.4 Rear Cover" on page 5-5.
3. Remove the top cover, see "5.5 Top Cover" on page 5-6.
4. Remove the right cover, see "5.7 Side Cover (Left and Right)" on page 5-8.
5. Disconnect the connector from the SMPS.
6. Remove 1 screw securing the fan.
Fan