Description of Menu Items
Phaser® 6280 Printer
101
Maintenance Mode
Use this menu to initialize the NVM, or to adjust the configurations for each type of paper.
Item Description
FW Version Displays the current firmware version.
Auto Regi Adjust Adjust the color registration automatically. Selecting On adjusts the color registration
automatically. The default is On.
Adjust ColorRegi Correct the color registration manually. For details, refer to Color Registration on
page 111.
• Auto Adjust
Correct the color registration.
• Color Regi Chart
Prints the correction chart.
• Enter Number
Enter the number to correct the registration.
Init PrintMeter Initializes the print meter.
Initialize NVM Initializes the settings stored in the NVM except for the network settings. The NVM is
a nonvolatile memory that stores the printer settings even after the power is turned
off. After executing this function and restarting the printer, all the menu parameters
are reset to their default values.
• You cannot execute this menu during printing.
• You need to restart the printer to activate this setting. After making the setting,
turn off the printer and then turn it on again.
Clear Storage Clears stored information.
Format HDD Formats the hard drive.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General