Xerox Phaser 6280 - Enabling Options

Problems With the Printer
Phaser® 6280 Printer
134
Enabling Options
If your options are not working, do the following to enable the options:
PostScript Driver
1. To start, do the following:
• Windows 2000-XP: Click Start > Settings > Printers and Faxes.
• Windows Vista: Click Start > Printers.
Right-click the printer and select Properties.
2. Click the Device Settings tab.
3. Under Installable Options, select Available for the option that you want to enable.
4. Click the OK button.
PCL Driver
1. To start, do the following:
• Windows 2000-XP: Click Start > Settings > Printers and Faxes.
• Windows Vista: Click Start > Printers.
Right-click the printer and select Properties.
2. Click the Options tab.
3. Click the option you want to enable to highlight it.
4. In the Settings for field, select Available.
5. Click the OK button.
Downloaded From ManualsPrinter.com Manuals