Xerox Phaser 6280 User Manual

Printing on Specialty Media
Phaser® 6280 Printer
77
Printing Glossy Paper
Glossy paper can be printed from any tray. It can be printed on both sides.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/6280supplies
.
Guidelines
• Do not open sealed packages of glossy paper until you are ready to load them into the
printer.
• Leave glossy paper in the original wrapper, and leave the packages in the shipping
carton until ready to use.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you are planning to use. Do not leave glossy
paper in the tray when you are finished printing. Reinsert unused glossy paper in the
original wrapper and seal.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause
glossy paper to curl and jam the printer.
Printing Glossy Paper from Tray 1 (MPT)
1. Gently pull open the Tray 1 (MPT) cover and open the paper guides.
6280-045
Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 6280 Specifications

General

Print Resolution	Up to 600 x 600 x 4 dpi
Processor	400 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Technology	Laser
Monthly Duty Cycle	70, 000 pages
Memory	256 MB (standard)
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, B5, Executive, Legal, Letter
Maximum Paper Size	8.5 x 14 inches