Xerox Phaser 6280 User Manual

Installing the Printer Drivers
Phaser® 6280 Printer
40
Windows 2000 or Later
To install the printer driver from the Software and Documentation CD-ROM:
1. Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch,
do the following:
a. Click
Start, and then click Run.
b. In the
Run window, type: <CD drive>:\SETUP.EXE.
2. Click the Language button, select your language, and click OK.
3. Select
Install Printer Driver.
4. Click I Agree to accept the license agreement, and show the Xerox Print Driver
Installation window.
5. Select the Phaser 6280 driver and click Install to show the Installation Options
window.
6. Select either PostScript and/or PCL 6 and click OK.
7. Click Install to start the installation.
8. When the installation is complete, select any of the following from the Installation
Status window:
• Set Printer As Default
• Print A Test Page
• Share Printer
9. Click Finish.
Note: PrintingScout is a separate option from the printer driver. To install PrintingScout,
click Install PrintingScout in the Software and Documentation CD-ROM. Then follow the
wizard to complete installation.
See also:
Online Support Assistant at www.xerox.com/office/6280support
Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English