Loading Paper
Phaser® 6280 Printer
52
Loading Paper
This section includes:
• Loading Paper in Tray 1 (MPT) on page 52
• Loading Paper in Trays 2-3 on page 55
Loading Paper in Tray 1 (MPT)
Use Tray 1 (MPT) for a wide range of media including:
• Plain paper
•Card stock
•Labels
• Envelopes
• Transparencies
• Glossy paper
• Specialty media including business cards, postcards, trifold brochures, and
weatherproof paper
• Pre-printed paper (paper already printed on one side)
• Custom size paper
See also:
About Paper on page 48
Using Tray 1 video tutorial at www.xerox.com/office/6280support
Loading Paper in Tray 1 (MPT)
In addition to plain paper, Tray 1 (MPT) can use various other sizes and types of print
media, such as envelopes and transparencies.
Make sure of the following points when loading paper in Tray 1 (MPT).
You can load up to 150 sheets or a stack of paper (65
– 220 g/m
2
, 17 – 40 lb. Bond, 40 – 80
lb. Cover) less than 15 mm high. Sizes can start from 3 x 5”.
• Tray 1 (MPT) accepts print media within the following dimensions:
• Width: 76.2
– 216.0 mm (3 – 8.5 in.)
• Length: 127.0
– 355.6 mm (5 – 14 in.)
• You can load media that is 65
– 163 g/m
2
(17 – 43 lb. Bond) for duplex printing.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
