Supported Paper and Media
Phaser® 6280 Printer
47
Printing Glossy Paper on page 77
Printing Custom Size or Long Paper on page 82
Paper That Can Damage Your Printer
Your printer is designed to use a variety of media types for print jobs. However, some media
can cause poor output quality, increased paper jams, or damage to your printer.
Unacceptable media includes:
• Rough or porous media
• Plastic media other than supported transparencies
• Paper that has been folded or wrinkled
•Paper with staples
• Envelopes with windows or metal clasps
• Padded envelopes
• Non-laser glossy or coated paper
• Perforated media
Paper Storage Guidelines
Providing good storage conditions for your paper and other media contributes to optimum
print quality.
• Store paper in dark, cool, relatively dry locations. Most paper items are susceptible to
damage from ultraviolet (UV) and visible light. UV radiation, which is emitted by the
sun and fluorescent bulbs, is particularly damaging to paper items. The intensity and
length of exposure to visible light on paper items should be reduced as much as
possible.
• Maintain constant temperatures and relative humidity.
• Avoid attics, kitchens, garages, and basements for storing paper. Inside walls are drier
than outside walls where moisture can collect.
• Store paper flat. Paper should be stored on pallets, cartons, shelves, or in cabinets.
• Avoid having food or drinks in the area where paper is stored or handled.
• Do not open sealed packages of paper until you are ready to load them into the
printer. Leave paper in the original packaging. For most commercial cut-size grades, the
ream wrapper contains an inner lining that protects the paper from moisture loss or
gain.
• Leave the media inside the bag until you are ready to use it; reinsert unused media in
the bag and reseal it for protection. Some specialty media is packaged inside
resealable plastic bags.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General