Color Registration
Phaser® 6280 Printer
113
Enabling/Disabling Automatic Color Registration
Use the following procedure to enable/disable automatic color registration when a new
print cartridge is installed.
1. Press the Menu button to display the
Menu screen.
2. Press the Up Arrow or Down Arrow button until
Admin Menu is displayed, and then
press the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until
Maintenance Mode is displayed, and
then press the Forward Arrow or OK button.
4. Press the Up Arrow or Down Arrow button until
Auto Regi Adj is displayed, and then
press the Forward Arrow or OK button.
5. Press the Up Arrow or Down Arrow button to turn automatic color registration
On or
Off.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
