Xerox Phaser 6280 User Manual

Configuring the Network Address
Phaser® 6280 Printer
38
Using the Control Panel
To manually set the IP address:
1. On the control panel, select the
Menu button.
2. Select the
Admin menu, and then press the OK button.
3. Select the
Network Setup menu, and then press the OK button.
4. Select the
TCP/IP menu, and then press the OK button.
5. Select
IPv4, and then press the OK button.
6. Select
IP Address use the arrows to configure the IP values, and then press the OK
button.
Changing or Modifying the IP Address Using CentreWare IS
CentreWare IS provides a simple interface that enables you to manage, configure, and
monitor networked printers from your desktop using an embedded web server. For
complete information about CentreWare IS, click the
Help button in CentreWare IS to go to
the CentreWare IS Online Help.
After setting the printer’s IP address, you can modify TCP/IP settings using CentreWare IS.
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s
Address field (http://xxx.xxx.xxx.xxx).
3. Click
Properties.
4. Select the
Protocols folder on the left sidebar.
5. Select
TCP/IP.
6. Enter or modify the settings, and then click
Save Changes at the bottom of the page.
Your printer reboots. Now use the new IP address to reach CWIS.
Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English