Loading Paper
Phaser® 6280 Printer
54
3. Insert all media facedown and top edge first into Tray 1 (MPT).
Note: Do not force the paper.
4. Slide the width guides until they rest lightly against the edge of the paper stack.
Note: Be careful not to bend the paper.
If Tray 1 (MPT) is configured for
Driver Size, configure the paper size and type in the print
driver.
When
MPT Mode is set to Panel Specified, you need to set the paper type and size settings
for the tray on the control panel in advance.
See also:
Setting Paper Types and Sizes on page 50
6280-011
6280-020
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
