To Next Page

To Previous Page

Printing on Specialty Media

Phaser® 6280 Printer

Loading Transparencies

Note: Transparencies with a white frame and full-color transparencies cannot be used.

1. After carefully fanning a small stack of transparencies, load them into Tray 1 (MPT)

with the side to be printed facing down. Load no more than 25 transparencies at a

time.

2. Slide the paper guides to the size of the transparencies.

3. Pull out the output tray extension when loading paper, such as transparencies.

Printing on Transparencies

When MPT Mode is set to Panel Specified, you need to set the paper type and size settings

for the tray on the control panel in advance. See Setting Paper Types and Sizes on page 50.

Printing transparencies continuously may lead to the output transparencies sticking to

each other. Remove the transparencies from the output tray after about 20 sheets, and

then fan them to lower their temperatures.

Using the PostScript Driver

To print on transparencies using the PostScript print driver, display the

Paper/Output tab.

1. From the

File menu, select Print.

2. Select this printer as the printer to be used and click

Preferences or Properties.

3. Select the

Paper/Output tab.

4. From

Paper Type, select Transparency.

5. From

Paper Tray, select Tray 1 (MPT).

6280-011

Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 6280 User Manual

Other manuals for Xerox Phaser 6280